Water-damaged ceiling repair isn’t the most difficult thing to handle. But, it’s not for those without some solid handyman chops. However, if you have the skills, you don’t necessarily need to be an experienced contractor or a rehabilitation expert. Although, it will present a few different challenges. Read on to see a basic water-damaged ceiling repair guide you can follow.
Before you begin tearing stuff out, be sure to have a plan for all the waste you’ll generate. Don’t make the gigantic mistake of skipping over the inevitable waste disposal because it’s a hard and fast reality. So, schedule remodeling debris junk clean up prior to starting and you won’t have to worry about what to do with all that waste.
Repairing ceiling water damage, whether it is the result of a broken pipe or torrential rainfall, is particularly important for the health and comfort of your home. Left unaddressed, the damage can lead to mold and a weakened structure. Regardless of whether it is made of drywall, plaster, or some other material, no ceiling can be fully protected against these vagaries of water. For this reason, it is important to know how to repair damage once it occurs. --Do It Yourself
When dealing with a water damaged ceiling, there is usually more than meets the eye. Because of the structure of many residential homes, water soaks sight unseen into the trusts, joists, insulation, and ceiling. Which is to say, there’s a need to move stuff out of the way and cover the floor.
Water-Damaged Ceiling Repair in Bradenton
If you have a ceiling with water damage, you can attempt to repair it on your own. But, if you aren’t confident about your skills, turn it over to a professional. Get at least three quotes and then examine them carefully. However, if you still want to go the DIY route, do the following for water-damaged ceiling repair:
- Seal the outside roof. The very first thing you need to do is prevent any more water from leaking down from the roof onto the interior ceiling. This is actually one of the more difficult parts of the job. This is due to the fact it could just require a simple patch and seal or replacing several components.
- Dry the interior ceiling. In order to patch the ceiling, you’ll next need to dry out the damaged portion. Open the windows to let fresh air circulate and do its job. You can also point an oscillating fan toward the ceiling, as well.
- Cut away the damaged portion. After the interior ceiling is dry, you’ll need to cut out the damaged portion. If the ceiling is bulging, cut at least several inches around it, cutting out a square or rectangle. Wear a dust mask, eye protection, and always be careful when on a ladder.
- Patch, prime and paint the entire area to finish. Once you have cut away the bad portion, then it’s time to install a patch. You’ll need to fasten it to the area and then, prime and paint it to finish up.