Partition wall takedown. It’s a big job, even if there’s no plumbing or electrical wiring involved. Then, there’s the matter of what to do with all that remodeling debris. Of course, that’s another job in itself. All of this, not to mention you’ll need to reconstruct the area, as well. So, take a few moments to read on to learn more about partition wall takedown and what you need to know.
Remodeling Debris Disposal
Next is to have a plan for what to do with all the debris. If it’s not a load-bearing wall and you’ve confirmed this with a professional, when you tear it down, there’ll be a lot of material debris to clean up and haul away. Forget about trying to put it out on the curb because that won’t fly. It’s not household trash, it’s construction debris. Which means it’s up to you to deal with it.
Before anything else, you need to determine whether or not this is a load-bearing interior wall. This guide concerns only interior walls that are not structurally supportive: i.e. non load-bearing. If your wall is partial—one end stops in the middle of the room—instructions are slightly different. If the wall is not load-bearing, you can remove it with impunity. If it is load-bearing, you’ve got problems unless you make provisions for supports to replace the supports you are removing. —The Spruce
The best thing to do is schedule a junk removal service to come and pick it all up and haul it off. Take the opportunity to get rid of other unwanted junk at the same time. This way, you kill two birds with one stone and make the most out of it.
Partition Wall Takedown in Oldsmar
Once you are sure that it is not a load-bearing wall, then you can take it down with a few steps. Here’s an overview of how to do partition wall takedown:
- Clear and cover the area. Empty the room on either side of the wall. Then, cover the area with tarps or drop cloths to minimize the mess. Additionally, try to keep the area free of children and pets, especially when you’re actually taking down the wall.
- Turn off the power. Partition walls can serve more than one purpose. Although their main function is to divide and define a space, these can also be a handy place for electrical outlets. If there are any of these present, you’ll have to shut off power to them on the main electrical panel and remove the wiring.
- Remove the trim. Pull the trim off the wall and place it out of the way. You can do this with a pry bar or claw hammer. When you do, take the time to remove the nails and place them in a container as an extra safety precaution.
- Tear down the partition wall. Wear a dusk mask and eye protection. Also, put on boots and heavy gloves. Then, use a sledgehammer to knock down the wall. Look inside to see if there are any other systems hidden away. If not, you can just demolish the wall with a sledge and pry bar.