How to Do Water Heater Removal

hot tub removalYour trusty water heater has served your household well. When you first discovered there was no hot water in the house, you immediately thought the dishwasher or washing machine used all the hot water. But, when you checked and neither was the case. Then, you checked out your water heater and thought it just had to be the heating element that’s the culprit. Turns out, that’s just not the case and now you need to know how to remove a water heater and what to do with it once you have a replacement.

How to Do Water Heater Removal

So, your water heater element seemingly went bad and you contorted yourself trying to read the model number (like you did when you had to remove the hot tub that stopped working and became an eyesore). It took many frustrating minutes to read that tiny print but you finally got it. Immediately, you rush over to the nearest home improvement store and bought the right replacement heating element. Once you returned home, you quickly turned off the power or gas, shut off the water supply, then hooked a garden hose to the drain line.

Hot water tanks are anchored by straps or strips of perforated metal called plumber’s tape. These anchors, usually secured to wall studs behind the water tank, keep the tank secure in case of an earthquake. The straps must be disengaged and the gas line and water line shut off before the tank can be removed. The job is fairly simple and is easily accomplished with the proper tools. —San Francisco Gate

Next, you drained the water heater and removed the access panel, then, unfastened the old heating element. You put in the replacement coil, replaced the access panel, unhooked the garden hose, and turned the power or gas back on. After a few hours, you turned on the kitchen faucet only to be disappointed — no hot water. You have to face the sad fact the water heater just doesn’t work any longer. Now, you’ve got to junk the water heater and install a replacement. Here’s how to remove a water heater:

  • Disconnect the power. Go to the main electrical panel and shut off the breaker to the water heater, if it’s electric. Then, you can disconnect the electrical wiring. If it’s gas, shut off the supply valve and give it several minutes before you disconnect the gas line. In addition, shut off the water supply and delivery lines.
  • Drain the reservoir tank . Though you’ve done this before just a few hours ago, you’ll have to do it all over again. Hook a garden hose to the drain valve and allow the water tank to drain completely so you can move it.
  • Disconnect the water lines. Once the water heater is drained, you’ll be able to disconnect the water lines by either unscrewing them or severing them. Be careful with severing the water lines because you’ll need to reuse these or you’ll have to patch or replace them.
  • Carefully remove the water heater. You can now carefully remove the water heater. Have a friend or family member help you out, because the appliance will be heavy and awkward to move out-of-place.

Once you have the water heater disconnect and removed from the space, just phone 800-433-1094 or visit Haul Junk Away. We’ll save you the time, effort, and frustration of disposing the water heater so you can get right to replacing it to get hot water back in your home. Like water damaged furniture, it won’t be easy to rid yourself of, so we’ll do it for you.

Old Wood Deck Restoration Made Easy

old wood deck restorationA wood deck is designed to provide a home with more outdoor entertaining space and improve backyard aesthetics. Over time, weather elements and traffic take their toll and signs of wear and tear become evident. Wood begins to crack, warp, and fade. This makes it unsightly, and, in some instances, unsafe. Warped boards can pose tripping hazards, while loose boards can come completely dislodged.

The good news is, you don’t have to be a master woodworker or skilled contractor to restore an old wood deck. All you need is some common tools and a weekend or two to bring your deck back to its former glory. Or, you can outright dismantle it and built another.

How to Do an Old Wood Deck Restoration

Before you begin the project, it’s best to be in-the-know about its real condition. Inspect it from all angles to look for mold, mildew, pest infestation, and wood rot. You’ll likely come across a few small problems, but if you find there’s significant rot, you’ll have to pull the wood out and dispose of it. If this is the case, just phone a junk hauling and removal service to do it for you. This will save time, effort, and money.

Following are some techniques you can use to give an old deck a new lease on life, or to help maintain the look of a new one. A project like this can be done in two days, but it’s best to spread the work over two weekends to ensure the wood is completely dry before you apply stain. —This Old House

Should it be in acceptable condition, enlist the help of a family member or friend. Be sure to check the weather forecast before you begin lugging all your tools and supplies out. When you are ready, simply follow these steps to restore your wood deck:

  1. Gather your tools and supplies. You’ll need a broom and/or leaf blower, drill-driver, pry bar, replacement planks or boards, eye protection, circular saw or table saw, leather gloves, screws, commercial wood deck cleaner, bucket, garden hose, scrub brushes or brooms, paint tray and roller, and latex waterproofing stain.
  2. Clear the deck off completely. Remove anything and everything from the deck. This includes furniture, outdoor decor, and anything that’s not part of the fixture. Then, sweep it off and/or use a leaf blower to clear any surface debris.
  3. Replace any boards as necessary. Next, you should begin to take-up and replace any boards that are loose, warped, or cracked. Set the damaged planks well aside to avoid tripping and use a circular saw or table saw to cut to length. Remember, measure twice and cut once and then fasten the cuts into place with screws and a drill-driver.
  4. Clean the deck with commercial cleaner. Once the replacements have been made, it’s time to clean the deck with commercial wood cleaner. Follow the manufacturer’s instructions carefully to ensure it’s cleaned properly.
  5. Seal and stain the wood to protect it. After the deck has dried, then apply a coat of latex waterproofing stain to treat and color the wood for longevity and looks. Again, follow the manufacturer’s instructions and it might be necessary to apply more than one coat.

When the latex waterproofing stain has set and dried, you can then put back any items that were previously on the deck. You’ll then be able to enjoy this refurbished deck outdoor space for many years to come! If you decide to take it down, just schedule debris clean up and have it all hauled away.

Best Ways to make More Yard Sale Money

yard sale moneyYou’ve just tried to pull into your garage and now, as many times before, realize space is seriously shrinking. It’s to the point there’s not a square inch left in the attic, the closets are ready to burst open, and, you’re simply running out of space. As you begin to rearrange things to be able to comfortably re-enter your car, you suddenly are struck by the notion that you don’t need all of this stuff. In fact, you can’t even begin to identify what’s in which boxes, or, where certain items are stuffed away.

Best Ways to make More Yard Sale Money

This is your “ah-ha” moment, and you know a garage sale is in store. It’s the perfect solution–you’ll not only free up quite a bit of space, but you’ll put some extra money in your pocket. Making it even better is the fact that you’ll actually be able to use your garage for its main purpose.

Would you like to get rid of your clutter and make some money? Garage sales (or yard sales or tag sales) are big business, even if the average selling price of goods is only 85 cents. Just multiply that by the 4,967,500 goods that are sold at garage sales each week, and the total weekly revenue that U.S. garage sales generate is $4,222,375, according to the website StatisticBrain.com. —Consumer Reports

If you want to have a successful yard sale, you don’t rush into it. That’s a great way to sabotage yourself and bring on a whole lot of frustration without much to show for your time and effort. Instead, do these things to make more yard sale money:

  • Gather stuff well before the event. One of the single best secrets of pro garage sale hosts use is to have a few dedicated boxes to toss things in for months in advance. When something of value, be it large or small, is no longer useful to you, put it in a box. Organize these as you go, so it’s easier to sort and price later on.
  • Clean it all up for the best impression. Dust, cobwebs, and other dirt is something that’s just plain icky, and, if it makes you cringe in the any way, it’s a really good bet potential buyers will feel the same. Clean everything up to make a good impression and sell stuff for more.
  • Form an alliance with neighbors. When you ban together with your neighbors, you create more of a destination because people will think it’s more likely they’ll find what they want. This also helps when you get referrals from neighbors who don’t have what someone is looking for.
  • Advertise far and wide. A yard sign and a few signs tacked to poles isn’t enough. You need to advertise online, about a week in advance, and also, in busy intersections.
  • Mark prices clearly and offer bulk deals. People will bargain for a lower price, so, sell items in bulk when you can to give them a better deal.

Another way to get a little more out of garage sale shoppers is to offer light refreshments. Some lemonade and fresh cookies are nice enticements. Just don’t make the mistake of putting refreshments out for self serve, instead, offer to pour a cup and small plate. As for the junk leftover, give us a ring and we’ll haul it away.

Clothes Dryer Replacement Made Easy

clothes dryer replacementThe convenience of major appliances makes day-to-day life a lot more simple. We often take these for granted because it’s so infrequent that we are without their function. When a clothes dryer stops working, it’s generally due to a loose, worn, or broken belt. It could also be an electrical problem. It’s also not unusual for the cost of the repairs to equal or even exceed the worth of the appliance. When this happens, it’s usually best to buy another to replace the old one, just like many other appliances.

Clothes Dryer Replacement Made Easy

Though it might seem like a simple task, replacing a clothes dryer will take a bit of time and effort. You’ll only need a few common hand tools, such as screwdrivers, wrench, duct tape, and a torpedo level, You’ll also need a helping hand to both move the old appliance out-of-place, and, to install the new one (not unlike replacing a water heater).

When you purchase a large appliance like a new washer and dryer or when you move an existing dryer, paying for professional installation can add to the cost. Instead of spending the money for a professional installation, you might consider doing the job yourself and saving the cash. —Overstock.com

When you’re ready to make the switch, gather your tools together, then, follow these steps to replace your clothes dryer:

  1. Turn off the breaker on the main electrical panel. The power to the appliance should be turned-off at the breaker so there’s no chance of electrocution. These units require a lot of power to function and you definitely don’t want to put yourself at-risk.
  2. Shut off the gas valve. If the appliance is also equipped with gas, be sure to shut it off at the valve.
  3. Disconnect the gas line. Slowly disconnect the gas line with a wrench and try not to bend it when doing so.
  4. Disconnect the electrical line. Pull the electrical power line from the wall outlet and then either duct tape it, or, if applicable, disconnect it from the appliance.
  5. Remove the exhaust tube. The exhaust tube is likely situated right behind or beside the appliance. Remove it from the appliance, leaving it attached to the wall vent.
  6. Carefully pull the dryer out of place. Along with another person, pull the dryer out. Do this carefully because it could easily damage the floor.
  7. Put the new appliance in-place. Work the new appliance in-place, also exercising caution to prevent floor damage.
  8. Connect the electrical and gas lines. Reconnect the gas and electrical lines to the new appliance.
  9. Install the exhaust tube. Connect the exhaust line to the dryer, then, work it into place carefully.
  10. Check for levelness. Place a torpedo level on top of the appliance to check for levelness. If it isn’t level, make adjustments to the legs.
  11. Turn the gas valve and electrical breaker on. Once these are on, you can then set your dryer to run to test it out.

Now that’s you’ve replaced the clothes dryer, you’ll have another task on your hands. If the old dryer doesn’t work or is damaged, you won’t be able to sell it to offset the cost of the replacement. What’s more, you’ll have to rent a truck and pay a dumping fee to get rid of it. Save yourself the time, effort, and frustration by calling a local junk hauling service to pick it up.

Steps for Removing Old Wallpaper

removing old wallpaperThere are few people who actually like wallpaper — it’s usually outdated and just down right ugly. What’s worse, it becomes discolored as it ages and peels from corners and seams. When this begins to occur, it’s typically a non-starter to try and re-adhere it to the wall. Usually, it’s time to remove it from the wall, but, that’s not as easy as it would seem. In fact, it’s generally a time consuming, frustrating trying to remove it from the surface to which has been stuck for many, many years.

Steps for Removing Old Wallpaper

Your first order of business is to identify the wall construction type: plaster or drywall. If the home is more than fifty years old, knock on the wall and listen for a hollow sound. Plaster tends to have a dull, solid sound because it’s more durable than drywall. If it’s drywall, you’ll likely hear a bit of an echo because it’s not as sturdy. The reason this is important is because if the wallpaper is adhered to drywall, you’ll have to exercise caution so not to damage it when scraping and scrubbing.

You love your house, but you cringe every time you walk by that bathroom. What were you thinking when you picked out that wallpaper? Relax, wallpaper is not forever. But, before you apply paint or a different wall-covering, you may have a little work to do. Removing old wallpaper is not that difficult. —Lowes.com

Once you’ve identified the wall construction type, you’ll need to remove everything from the walls, which includes any decor, along with switchplates and wall outlet plates. Next, clear out the entire room because practically everything will be covered with dust. Then following these steps to remove old wallpaper from the room:

  • Turn off the electrical circuit breakers to the outlets in the room. You’ll have to wet the walls substantially to remove the glue, so, shut off all circuit breakers to the wall outlets in the room to avoid any electrical problems.
  • Cover the entire area with drop cloths, particularly the flooring. Use drop cloths to cover the floor and all surfaces in the room to protect them and make cleanup a bit easier. You can also hang plastic in the doorway to minimize any broadcasting of dust and debris into other rooms.
  • Begin to peel back the wallpaper from the corners and/or separated seams. If you can grasp a corner or a split seam with your fingers, do so, and pull back very carefully. If there are no loose seams or peeled corners, use a putty knife to gently scrape under the wallpaper. Peel off as much as you can, even entire sections, if possible.
  • Use a commercial stripping solution to saturate the remaining wall paper. Follow the manufacturer’s mixing instructions and then apply the commercial stripping solution to any wallpaper that remains stuck to the surface. Give it some time to soak-in and loosen the wallpaper before peeling and scraping it off.
  • Use an abrasive scrubbing pad to remove any small remnants. There will likely be small remnants of wallpaper left behind, so, use an abrasive scrubbing pad to get it off.

Let the walls dry and then you can fill holes with spackling and let it dry. After the spackle is dry, you can then prime and paint the walls to finish the job.

Ways to Make a Small Room Look Larger

make small room look largerThere are a few ways to make a small room look larger and most of them are simple to do. By just using a few visual tricks, you can make a small room appear bigger but it usually comes with a bit of compromise to pull off. That’s because we often arrange rooms around a specific purpose and not totally for aesthetics and free traffic flow. But, if you do want a small room to look like it’s bigger, with some changes, you’ll have what you’re seeking.

Ways to Make a Small Room Look Larger

The good news is these tips and tricks aren’t so much about home improvement projects. So, you can either opt to remove that popcorn ceiling texture or just leave it and ignore it. Although, you can venture into a little home improvement to get even better results. But, the vast majority of ways to make a little room appear bigger are about what is and what isn’t inside the space. If you think about it, that makes a lot of sense.

The good news is that the key to successful small-space living might be easier than you think. It all boils down to tricking the eye into perceiving more space by employing three simple concepts: scale, light, and movement. —Remodelista.com

If you look at just about any room in your home, there’s a really good chance you have a lot more stuff that you need or even want. We’re just accustomed to accumulating things we don’t even notice. But, eventually, we do — like when it’s time to move, remodel, or replace something. Then, it becomes all too apparent there’s just too much clutter. So, here are some helpful ways to make a small room look larger:

  • Start by decluttering, removing unnecessary items. Okay, so we’ve already begun to touch on this and now it’s time to make it an actionable task. Go around the room and identify unnecessary things. Be honest and you’ll get some fabulous results.
  • Paint the room with neutral colors and shades. Next, consider repainting the room to give it a little more of an open feel. For instance, block and bold colors tend to make a room appear smaller visually. Neutral colors, shades, and tones on the walls and trim do the opposite, making a little room look bigger.
  • Arrange furniture to really maximize traffic flow. Now, for the hardest part of all. We’ve previously mentioned arranging a room for a specific purpose above. Well, that’s precisely what makes a room look small. So, instead of arranging furniture for the best view of the TV, arrange it to maximize traffic flow.
  • Pare down the total amount of interior room decor. Along with any clutter, go more minimalist to make that little room appear larger. By just removing some or most of the decor around the living space, it will look significantly bigger.

If you need help with decluttering or just cutting down on junk, just phone us at 800-433-1094 or visit Haul Junk Away.

Popcorn Ceiling Removal Steps

popcorn ceiling removalPopcorn ceiling removal doesn’t take an experienced and licensed contractor but it this DIY project is very labor intensive. It’s actually not difficult, it’s just a whole lot of monotonous, backbreaking work. But, you can do a textured ceiling removal on your own, if desired. You only need a few basic tools and materials, along with a sufficient amount of time. Otherwise, the popcorn ceiling removal steps are quite straightforward.

Popcorn Ceiling Removal Steps

If you’ve done home improvement projects before, like a linoleum flooring removal job, you know it’s more about perseverance than anything else. It’s going to take time and patience to pull off. So, if you have enough time and the will to see it through to the end, you can do it on your own or with the help of a few friends. You might wonder why it’s even there in the first place. After all, it’s not very attractive.

Very few things date a space like a popcorn ceiling—and not in a charming way. They’re difficult to repair, hard to clean, and catch dust easily; but despite all these cons, their popularity exploded beginning in the late 1950s because they made easy work of finishing ceilings and hiding imperfections. If it’s time to bid farewell, there are three popular ways to take on the challenge: scrape, cover with a new layer of drywall, or skim coat with plaster to create a new texture. Which is best? Depends on a lot of things, including the age and condition of the substrate (ceiling). —This Old House.com

Well, the purpose of popcorn or cottage cheese or textured ceilings are to cover flaws in the ceiling behind them. If you have ever removed a kitchen soffit, it’s somewhat like that — hiding seams and other flaws which aren’t aesthetically pleasing. So, understand what’s underneath might need a little TLC to look its best. Here are the popcorn ceiling removal steps you can follow to get the job done:

  • Test for asbestos. If the house is older than the early 1990’s, it’s a good idea to test for asbestos before you start scraping away. Asbestos was used widely for many decades prior and if it’s present, you’ll need to hire a dedicated service to get it removed from the house.
  • Cover the floor and doorway(s). Next, if the ceiling tests negative of asbestos, you need to cover the floor with drop cloths and close off the doorways with plastic. Although the debris won’t be completely contained in the room, this will greatly cut down on it getting everywhere.
  • Soften the texture with solution. You can easily find premade softening solutions at any home improvement store. This is what you’ll use to soften the texture so you can scrape it away from the actual ceiling underneath. Be sure to follow the manufacturer’s instructions carefully for the best results.
  • Scrape the texture off the ceiling. When the texture is soft enough, test a small area to see if it comes away clean from the ceiling. Do this with caution, because it’s very easy to accidentally gouge the ceiling, which will then need repair.

If you’re going to remove a popcorn ceiling, phone 800-433-1094 or visit Haul Junk Away before you start to schedule remodeling debris removal.

Most Important Moving Day Prep Steps to Take

moving day prep stepsThe most important moving day prep steps to take are often the ones we don’t tend to give that much forethought. Let’s face it, moving isn’t fun and it’s stress inducing, to say the least. Suddenly, you’ve got to find a way to get rid of that old projection TV, as well as a bunch of other junk. But, that’s not necessarily a bad thing, because the less you have to move with you, the better.

Most Important Moving Day Prep Steps to Take

When it’s time to move, it’s also time to do a lot more than just relocating furniture and clothing. For instance, you’ll probably have a storage shed cleanout on your hands, along with an attic cleanout, and plenty more. All of a sudden, you realize just how much stuff you actually have. And, you can’t just leave it behind. That means having to deal with all of it, no matter the size and there’s where the real work come into play.

Eliminate as much trash as you can before moving day. Last-minute garbage will inevitably build up the day prior to and the day of loading. Try making a deal with a neighbor to use their trash container for your last-minute debris. Many items that are considered flammable are not going to be loaded by the driver and crew. Understand what these items are so that you are not stuck with trying to get rid of them on day of loading. —Moving.com

This is why it’s very useful to know at least a few ways to minimize moving stress. The problem is often twofold: time and volume. Unfortunately, too many people procrastinate too long and have to deal with a huge amount of possessions in a short period. The best way to go into a move is to transition early. In other words, being proactive works wonders, particularly if you have a solid plan to follow: Here are the most important moving day prep steps to take:

  • Consume all frozen and non-perishables. The food in your freezer and pantry is among one of the long list of often overlooked items. Consume frozen food and non-perishables a couple of weeks before moving day and don’t add to them.
  • Get all your prescriptions refilled and/or transferred. If you take prescription medication, be sure to make arrangements for these at least 10 days in advance. This will give you enough time to get a refill and/or transfer prescriptions.
  • Transfer or cancel monthly subscriptions. Along with prescription medications, any subscriptions, like magazines, newspapers, and more need transferring or cancelling. Because these are essentially on auto-pilot, these are forgotten until the last-minute.
  • Have your vehicles checked by a mechanic . About a week before moving day, you should take your vehicles into a mechanic to have them checked. After all, if there’s an unknown problem, it’s best to learn about it before you’re moving.
  • Schedule utilities to turn off and on. Of course, it’s always necessary to schedule utilities in advance so you have power, water, and more ready-to-go when you move into your new place.

When you’re getting ready for a move and need to purge junk, just phone 800-433-1094 or visit Haul Junk Away. Our crew will take a lot off your hands so you have less to move with you.

Ways to Get Rid of an Old Projection TV

old projection TVThat old projection television. Once a great entertainment amenity, now it’s just plain ugly and unwanted. Trouble is, it’s heavy, awkward, out-of-style, and all these qualities mean it’s going to present greatly difficulty to unload. What you may (or may not) know, is this type of technology isn’t welcome just anywhere. And, that makes it a real chore to get rid of once and for all. But, that doesn’t mean there aren’t ways to get rid of an old projection TV.

Ways to Get Rid of an Old Projection TV

Whether you’re trying to minimize moving stress or just getting on with out with the old and in with the new, you’ll quickly learn putting it on the curb won’t make it magically disappear. That’s because the vast majority of local trash collection agencies are prohibited from taking hazardous materials. And, that old projection television set is full of components categorized as hazardous materials.

A projection TV is a television set that uses a video projector to display its picture. With the projector, the TV is able to cast a much larger image than most standard models, making the TV set into a small-scale cinema screen, which many owners use in their home theaters. A projection TV can be either rear projection, making it function like a standard TV set, or front projection, which works like a movie projector. —Our Everyday Life.com

Much like getting rid of old baby furniture (which can easily appear on a present or past recall list), your options are limited. This isn’t to say you are stuck and forced into covertly throwing into a commercial retail dumpster. (After all, that’s illegal and not worth the risk.) But, it does mean you can’t simply wrangle it to the street curb. Moreover, selling it is typically a dead-end because old projection TVs aren’t exactly in high consumer demand. So, here are some helpful ways to get rid of an old projection TV you can try out:

  • Donate it. Believe it or not, there are some charities and other organizations who willing welcome such a donation. Since these entities are typically short on cash, most donations are accepted. While you can’t donate it for the charity to sell, it could be put to use in a shelter or school needing an entertainment amenity.
  • Part it out. Another option is to sell the parts or sell it to a repair store. Look up a few used appliance and furniture stores and make some phone calls to learn if it’s something that can be taken off your hands. You might get very little money or nothing at all but at least it’s gone for good.
  • Convert it. If you’re handy with tools, you might consider repurposing it for another use. Remove the internal electronics and convert it into a television stand or into bookcase. Whatever you can imagine, it can be made reality, with just a bit of creativity.
  • Make repairs. You can also give it new life for continued use. With some knowhow, you can repair it (if it doesn’t work properly) and put it into a guest room. It might also be worthwhile to use various parts elsewhere.

Another option is to junk it by phoning 800-433-1094 or visit Haul Junk Away. We’ll haul it away, along with anything else you’d like to unload for good.

Top Ways to Minimize Moving Stress

minimize moving stressMoving. It’s something we all do, usually a few times in our lives. And, it’s always something we dread. Let’s face it, moving isn’t fun, it’s not an adventure. It’s a real chore to relocate all your possessions from point A to point B, even if the distance is right next door or across the street. Moving creates a stressful situation because it comes with deadlines and a whole laundry list of tasks (not of which the least is the furniture). Fortunately, there are ways to minimize moving stress

Top Ways to Minimize Moving Stress

So, it’s nearly time to move and your mind is racing. You’re trying to remember everything to ensure your list is complete. Now, you’re facing the fact you’ve got to be rid of this and that. It’s time to dispose of baby furniture and be rid of it once and for all. Or, perhaps you’ll need to cleanout a storage unit. That just doubles your workload and it’s something you don’t relish in the least. The point is organization is key.

While most people agree that moving is stressful, there are ways to ensure you have a much less stressful move than you thought possible. There are lots of ways to reduce the stress of moving so you can actually enjoy the moment, look forward to the change and know that this move can be a positive and rewarding experience – a chance to start over. —About.com

About three weeks before the move, you should schedule utilities to turn off and on. Start going through that frozen food and perishables so you don’t have to throw it out (or lug it with you.) Update your mailing address with your bank, work, insurance carriers, and others. Plus, if you are on prescription medication, have a plan. And, get ready to clean out that shed. Here are some more helpful tips for minimize moving stress:

  • Ask for help. When it comes to moving, there is such thing as too much help. But there’s also such thing as too little help. Enlist the help of a few friends and that will make the move smoother without creating chaos and running into one another.
  • Tell your neighbors. A day or two before your move, be sure to let your neighbors know what’s going on so there aren’t roadblocks impeding you. Ask them to help keep the street clear so you have ample room to move out furniture and a clear path for your own vehicles.
  • Plan for kids and pets. Kids and pets will become an issue on moving day. Their curiosity can and will arise. Even if the pets scurry away, you might face a real predicament trying to get them to come out of hiding. So, formulate a plan for children and pets so they aren’t in the way.
  • Walk-through at least twice. Once everything is out of the house, garage, and shed, it’s time to do a walk-through, inside and out. Don’t just walk-through one time, do so at least twice; that way, you won’t unwittingly leave something behind.

When you need help with purging stuff for a move, go ahead and phone 800-433-1094 or visit Haul Junk Away. We can help with furniture removal or just hauling junk away, whatever you need to make the move go smoother.