Junk Removal in

Kensington, MD

Contact Us

aluminum carport dismantleAluminum carport dismantle and disposal isn’t necessary a hard job, but that doesn’t means it’s an easy thing to do. Now, that might not make a whole lot of sense at first, but it’s true. While the actual takedown is straightforward, the dismantle is time-consuming and the disposal does present a real challenge. Of course, you can sell it for scrap. However, understand that not all metal is acceptable and some is downright discouraged. So, when it’s time to get into an aluminum carport dismantle and disposal job, you should know what you’re getting into ahead of time.

Aluminum Carport Disposal

Let’s begin with the disposal part first. While some people will immediately see dollar signs because it can easily be sold for cash, as just mentioned, that’s not always the case. In fact, the aluminum must be “clean.” That is, no steel or other prohibited items. Extruded aluminum is generally acceptable, but it too, must be clean so it’s acceptable.

Removing a metal carport is an easy process, so long as you have a few basic tools and know the proper order in which to disassemble the parts. Before starting though, take note of the type of metal your carport is made from. A steel carport will be significantly heavier than an aluminum carport, so take care when handling larger pieces, and always have at least one helping hand ready to assist you. —Do It

Of course, you’ll also need a way to transport the aluminum and other materials. That in itself presents a substantial challenge. You’ll need a truck and/or trailer to get it done. Otherwise, it’s just a logistical nightmare.

Kensington Aluminum Carport Dismantle Procedure

Now, when it comes to an aluminum carport dismantle job, you’ll have your work cut out for you. This isn’t a single-person job, by the way. So, be sure to get a few people to help you out. You’ll need drill-drivers, leather gloves, safety glasses, pry bars, ladders, and reciprocating saws.

  • Clear the whole area. Start with making it a safe place to work. Don’t just jump into it. Take the time to clear the area of everything. This is to prevent damage to vehicles, windows, and other things from falling metals or pans which get caught in a sudden wind.
  • Unfasten the retaining screws. Step up on a ladder and then locate and remove the retaining screws that go through the aluminum pans down into the frame. Then, you can pry all the pans off the frame. (It might require a little effort due to the caulking.)
  • Take down the whole frame. Next, you can finish by taking the frame down. You can remove the top parts and then cut the support posts down with a reciprocating saw. You’ll then have to dig up the anchors.

When you need an aluminum carport dismantle and disposal done, just phone us at 800-433-1094 or visit Haul Junk Away.

- Enter Your Location -
- or -