CALL TO BOOK
Junk Removal in

Dundalk, MD

Contact Us

DIY kitchen peninsula removal and disposal is a bit tricky. While it doesn’t necessarily require specific trade skills, it is very helpful to be handy around the house. At least a medium-level skill-set is needed to do it right. So, if you’re a total novice, this probably isn’t for you. The real challenge comes from peninsulas equipped with electrical power and/or water. Read on to learn more about DIY kitchen peninsula removal and disposal.

Kitchen Peninsula Disposal

Kitchen island removal isn’t all that difficult, so much as it is time-consuming. The real problem lies in what you’ll do with the materials. If you’re beginning a kitchen remodel, you’ve got to think far beyond style and upgrades. After all, any type of renovation generates a whole lot of waste. And, you’ll need remodeling debris removal and hauling for that part of the process.

A kitchen island stands away from the normal counter space. It provides an extra work surface as well as storage. If you need to move the island during a kitchen remodel, you may run into some issues. If yours contains a cooktop or sink, you may need to bring in a professional to move the gas, electrical or plumbing lines. —Do It Yourself.com

In other words, think about the entire remodel as a series of phases. There’s the planning phase, the demolition phase, the debris removal, the build out, plumbing and electrical, appliance installation, trim, and more. If you plan to reuse the island, you’ll need to set it aside (if you’re relocating it). But, if you are taking it out completely, you can simply call a junk hauling service.

Dundalk DIY Kitchen Peninsula Removal

Empty it out to start. Then, gather together a couple of drill-drivers, pry bars, wrenches, and hammers. Then, enlist the help of a friend or family member. Once you’re ready to begin, follow these steps to remove your kitchen peninsula from where it stands:

  • Disconnect the plumbing and wiring. You’ll need to disconnect the electrical wiring and plumbing. First, turn off the power by shutting off the breaker and the water supply. If necessary, call in professionals for this step.
  • Take off the molding and trim. Pry off the molding and trim from the top and bottom of the kitchen peninsula. Put the molding and trim out-of-the-way so it isn’t a tripping hazard.
  • Remove the countertop. Once the electrical wiring and plumbing is disconnected, you can take off the countertop. You’ll need someone to help you unfasten it and lift it off the base.
  • Disassemble the base. When the countertop is off the base, you can then disassemble the base itself with a pry bar and drill-driver. (It will probably be assembled in four sections.)

When you need remodeling debris disposal, go ahead and phone 888-537-7445 or visit Haul Junk Away.

X
- Enter Your Location -
- or -