Easiest Way to Take Out Kitchen Cabinets

take out kitchen cabinetsYou want to know the easiest way to take out kitchen cabinets because you’ve already removed an old dishwasher and are replacing it, as well as doing a kitchen makeover. The truth is, this is one of the least expensive ways to update a kitchen and the change completely reinvigorates the space. Old kitchen cabinets are not only unsightly, they don’t provide as much function. All this, not to mention the fact that if you plan to resell, those will be a big objection.

Easiest Way to Take Out Kitchen Cabinets

Now, you’re planning to remove the cabinets and perhaps, prep the room for tile. But, if you want to make the whole project more simple and involve less work, you can refinish kitchen cabinets to give them new life. All you have to do is to remove the hardware (pulls, hinges, et cetera). Clean everything thoroughly, then allow to dry. Prime and paint the cabinets, and then, replace the hinges and pulls with your choice. Rehang the cabinets to complete and enjoy.

Most cabinets from the last 25 years or so are factory-built boxes screwed to one another on-site. That’s why you’ll generally see vertical seams in the face frames. If that’s what you have, find and remove all the screws in the edges of the stiles, which hold the cabinets together. Then take out the screws holding the cabinet to the wall or floor. —This Old House

But, if you don’t like the style, even if it was made to look new by refinishing, then you’ll have to take out the kitchen cabinets. While this might seem like a daunting task, it’s actually not very difficult, but will take some time. It’s best to have at least one set of helping hands so you can coordinate things. In addition, it’s a good idea to cover the countertops to catch any debris that falls while you’re uninstalling the kitchen cabinets. Here’s the easiest way to take out kitchen cabinets:

  1. Empty the cabinets. Your first step is to empty the cabinets. You need to place the contents of the kitchen cabinets in another area to avoid breakage. If you are able, store the contents in a pantry or in a nearby room, temporarily.
  2. Remove the doors and/or drawers. Next, remove the doors and/or drawers from the cabinets. This can be done with a power drill-driver or with a hand tool, like a screwdriver. If you are going to reuse any of the parts, be sure to label each.
  3. Remove the molding along the soffit. Use a pry bar to remove the molding from the soffit. Depending how it’s installed, this might take some elbow grease and effort. Remove the molding carefully to avoid damaging the soffit.
  4. Unfasten the retaining screws. Now the doors, drawers, and molding is off the cabinet units, you can unfasten the retaining screws with a power drill-driver or with a hand tool. Have someone hold the cabinet units in place so they don’t come crashing down on the counter.

If you need cabinet removal or construction and remodeling debris removal, just phone 800-433-1094 or visit Haul Junk Away. We go on-site to serve you and can help with many other things, as well.

Bookmark the permalink.

Comments are closed